5 mM BPY, which give out the 0.65 V (SHE) for Ag+|Ag and 0.25 V (SHE) for Cu2+|Cu. Correspondingly, these values are similar

with the above calculated values. We can infer that the Fermi energy levels for Ag+|Ag and Cu2+|Cu are −5.09 and −4.69 eV from the measured potentials, respectively. For the Au electrode, we found that the potential of Au wire is about 0.45 V in 50 mM H2SO4 + 0.5 mM BPY and Tariquidar give out −4.89 eV for the Fermi energy of Au. Returning back to our experiments, the electrodes were controlled near the potentials of the reference wires (Ag, Cu, and Au) [28]; thus the Fermi energy of the electrode may also be approximated to these energy levels. However, these values are quite different from the Fermi energy of Au (−5.13 eV), Ag (−4.65 eV), and Cu (−4.26 eV) in vacuum [35], and may change the essential orbital channel of the molecules. Selleckchem SC79 It is not possible to know which orbital channel (such as HOMO or LUMO) is actually the most favorable in the current study. However, the conductance

order of the single-molecule junctions with different metallic electrodes is caused by the different coupling efficiency between the metallic electrodes and the anchoring group, and also the molecular energy levels and Fermi energy level of the electrodes [8, 9]. Further calculations are needed to fully understand the influence of the metallic electrodes. Conclusions We have measured the single-molecule conductance of pyridine-terminated Fossariinae Temsirolimus in vitro molecules contacting with Ag electrodes. All three molecules (BPY, BPY-EE, and BPY-EA) have three sets of conductance values and show the order of BPY > BPY-EE > BPY-EA. These values are larger than those of molecules with the Cu electrodes, but smaller than those of molecules with the Au electrodes. The different single-molecule conductance between Ag, Cu, and Au electrodes can be attributed to the different electronic coupling efficiencies between the molecules and electrodes. Authors’ information XYZ is a Master’s degree student under the supervision of XSZ in the Institute of Physical Chemistry, Zhejiang Normal University,

China. Acknowledgements We gratefully thank the financial support by the National Natural Science Foundation of China (Nos. 21003110 and 21273204). References 1. Bruot C, Hihath J, Tao NJ: Mechanically controlled molecular orbital alignment in single molecule junctions. Nat Nanotechnol 2012, 7:35–40.CrossRef 2. Kiguchi M, Kaneko S: Single molecule bridging between metal electrodes. Phys Chem Chem Phys 2013, 15:2253–2267.CrossRef 3. Song H, Reed MA, Lee T: Single molecule electronic devices. Adv Mater 2011, 23:1583–1608.CrossRef 4. Venkataraman L, Klare JE, Nuckolls C, Hybertsen MS, Steigerwald ML: Dependence of single-molecule junction conductance on molecular conformation. Nature 2006, 442:904–907.CrossRef 5. He J, Chen F, Li J, Sankey OF, Terazono Y, Herrero C, Gust D, Moore TA, Moore AL, Lindsay SM: Electronic decay constant of carotenoid polyenes from single-molecule measurements.